Galaxy S3 GT-I9300 အတြက္ Android 4.3 Jelly Bean Firmware (Thailand) ကိုတင္ေပးလိုက္ပါ
တယ္။ေအာက္မွာလည္းဘယ္လိုအဆင့္ဆင့္လုပ္ေဆာင္ရမယ္ဆိုတာဖတ္ျပီးလုပ္ေဆာင္သြားပါ။
Firmware Version Info (PDA: I9300XXUGNA5 CSC: I9300OLBGNB1
MODEM: I9300DXUGNB1 CHANGELIST: 2429075 BUILD DATE: 16.01.2014)
Device Name - Galaxy S 3 (International)
Model - GT-I9300
Region - THL (Thailand)
Version - I9300XXUGNA5
OS - Android
OS Version - 4.3
Build Date - 16.01.2014
Changelist - 2429075
က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္ ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။
တယ္။ေအာက္မွာလည္းဘယ္လိုအဆင့္ဆင့္လုပ္ေဆာင္ရမယ္ဆိုတာဖတ္ျပီးလုပ္ေဆာင္သြားပါ။
Firmware Version Info (PDA: I9300XXUGNA5 CSC: I9300OLBGNB1
MODEM: I9300DXUGNB1 CHANGELIST: 2429075 BUILD DATE: 16.01.2014)
Device Name - Galaxy S 3 (International)
Model - GT-I9300
Region - THL (Thailand)
Version - I9300XXUGNA5
OS - Android
OS Version - 4.3
Build Date - 16.01.2014
Changelist - 2429075
- Download Android 4.3 XXUGNA5 Firmware for Galaxy S3 I9300 from the above list
- Download Odin 3.09
- Switch off your phone and boot Galaxy S3 I9300 into Download Mode by pressing and holding the Volume Down+Home+Power buttons (long press until the boot screen appear), now press Volume Up key to proceed to Download Mode.
- Extract the downloaded Odin3.09 zip file and run the Odin3 v3.09.exe file as an administrator (Right click on the .exe file and click on Run as administrator)
- Now connect your Galaxy S3 I9300 to your computer via USB cable
- In Odin3 screen, you should see a COM Port number like “0:[COM7]” at ID:COM section and “Added!” text at the message box. This means your device has been detected by Odin3.
- Make sure that, only the “Auto Reboot” and “F. Reset Time” options are checked.
- Now, extract the downloaded firmware zip file, you’ll find a firmware file with extension .tar.md5
- In Odin screen, click on AP button and select the firmware file with .tar.md5 extension (The firmware file look something like: I9300XXDLJ5_I9300ODDDLI7_INU.tar.md5)
- Now, click on the Start button to begin the installation process, wait few moments.
- Once completed, you would see “PASS!” message in ID:COM port having green background
- Your phone should automatically reboot after completion
- You can now disconnect your phone from computer
- Finish
က်ြန္ေတာ္တင္သမွ်ပိုစ့္ေတြ Facebook ကေနရယူခ်င္တယ္ဆိုရင္ ဒီမွာ Like ႏွိပ္ပါ။
မန္ဘာ၀င္ခဲ့ျခင္းျဖင့္ ပိုစ့္အသစ္တင္တိုင္း မိမိ Gmail ထဲကိုတိုက္ရိုက္ေရာက္ရွိမည္ျဖစ္ပါသည္။
ထို႔ေၾကာင့္မန္ဘာ၀င္ခဲ့ဖို႔ဖိတ္ေခၚပါတယ္။
Thank You For Downloading And Dont Forget to Clicking Once on a Ad Banner.
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာမ်ားကို ကလစ္ခဲ့ပါခင္ဗ်ာ။
အဆင္ေျပတယ္္ဆိုရင္ေတာ့ေၾကာ္ျငာမ်ားကို ကလစ္ခဲ့ပါခင္ဗ်ာ။
No comments:
Post a Comment